Raised Access Flooring Testing

Raised access flooring systems are a staple of modern commercial spaces. They allow implementation of complex electronics, communications and environmental systems to improve operational processes.

Varieties of testing

There are three main ways in which raised access floors can be tested:

  • Air plenum testing
  • Air leakage testing
  • Hygrothermal testing

Air plenum testing

The plenum is the space under the raised access flooring. This space is used to facilitate air circulation for heating and air conditioning systems. The plenum must provide clear routes for heated or conditioned air and their return air flows. It must be able to cope with the air pressure involved, which can frequently exceed atmospheric pressure.

There is no mandatory standard for air plenum testing. It is down to the project’s mechanical engineers to set the appropriate specification. This is normally set in litres per second, per square metre.

The plenum is tested using a special fan which is set up in the test zone. All air ducts must be turned off and sealed. The test is conducted by taking a series of pressure readings over a period of around 30 minutes.

It is notable that approximately 80% of plenums fail their first air test.

Air leakage testing

The air leakage test determines the rate at which air will leak through cracks in a raised access floor system. This test is relevant for floors with underfloor air distribution systems. A sample of panels is placed in an airtight chamber where the test is conducted.

Air is pumped into the chamber at a constant airflow and test pressures are measured with a manometer. During the test, different test pressures are applied and the air leakage unit can be measured per crack length and per unit floor area.

Hygrothermal testing

Raised access floors in data halls and computer centres are often exposed to extremes of temperature and humidity. The hygrothermal test measures the movement of heat and moisture through a raised access floor system. It part of the required testing within the PSA MOB PF2 PS/SPU March 1992 Specification for Raised Access Floors. The test measures the dimensional stability of floor panels when exposed to a wide range of temperature and humidity.

Contact us to find out more

Fieldmans Access Floors have been installing raised floor systems since 1993. We work on a global scale and have constructed installations in spaces ranging from 3m² to 25,000m². Our experience in a broad range of environments allows us to determine the appropriate specifications for each project.

If you require raised access floor testing, we can arrange a site visit and recommend the tests appropriate for your needs. We will advise you on the most suitable specifications for your structure and we will carry out extensive testing on your system.

If remedial works are required, we will be pleased to offer our expertise.

If you want to know more about our raised access floor testing services, please call us today and our expert staff will be happy to advise you further.

A strong focus on customer satisfaction, with a can-do attitude, coupled with a wide breadth of experience and understanding of the many products and systems on the market are the key benefits to you when partnering with Fieldmans Access Floors Ltd.

Should you wish to contact us directly for a no-obligation site survey or just some advice, please call on

 or complete the contact form by clicking here

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close